- Factory direct sales
- Quality Assurance
- Quick response
- Worry-free service
Slot Feeding Machine
Factory direct sales:Yes
Delivery method:Sea/land
Trough feeder is also known as reciprocating or swinging feeder, it is a kind of feeding equipment used earlier. Many type, the common point of the structure is equipped with the control of the material layer.
- +86 15137297962
- 7*24 hours service hotline
-
Applicable MaterialsGranite, diabase, river pebble, quartz stone, calcite, dolomite, barite, gypsum, iron ore, gold ore, etc.
-
Application AreasWidely used in metallurgy, coal mining, mineral processing, building materials, chemical industry, abrasives and other industries, has become an essential equipment in crushing and screening joint operations.
| Model | Maximum Feed Size(mm) | Capacity (t/h) | Power (kw) | Weight （kg) | Slot Size(mm) | Dimension (L×W×H)(mm) |
| CG600×400 | 100 | 10--30 | 4 | 950 | 600×400 | 2800×800×600 |
| CG600×600 | 200 | 30-50 | 4 | 1100 | 600×600 | 2700×900×850 |
| CG980×1250 | 350 | 60-90 | 7.5 | 1750 | 980×800 | 3560×1000×1000 |
Advantages of Slot Feeding Machine
Trough feeder is also known as reciprocating or swinging feeder, it is a kind of feeding equipment with earlier storage tank discharge application.
Many type, the common point of the structure is equipped with the control of the material layer.
The difference is that the Angle of the feed plate is different, generally along the unloading direction down 5 degrees and larger inclination Angle (less than the static accumulation Angle of the material) and the Angle is zero.
The action of the feeding board has the front and back reciprocating movement type, jitter type and swing type.
The transmission mechanism is crank type.
Working principle of Slot Feeding Machine
It is suitable for the short-distance transportation of metal and non-metal materials.
Trough feeder is widely used in metallurgy, chemical industry, coal, mining, water conservancy and hydropower engineering and other departments, the block and granular materials from the storage bin, to a variety of different receiving devices.
The trough feeder can be set up on the ground or be hoisted on the discharge port of the mine.
The trough bottom plate is used for reciprocating motion with 20-60 strokes / min and a stroke of 20-200mm.
The stroke can be adjusted by the eccentric wheel of the drive, and the eccentric is half of the stroke.
According to the production practices of some concentrators, the eccentric distance should not be less than 30mm for sticky ore.
The trough body width of the trough feeder is about 2-2.5 times of the maximum grain size of the feed.
The largest trough feeder can meet the supply of iron ore less than 500mm.
